Blog

Washers are categorized as follows: Flat washers (Grade C), Large washers (Grades A and C), Extra-large washers (Grade C), Small washers (Grade A), Fl

The movement of material within the extruder screw is studied in three segments, and therefore, screw design is often segmented accordingly. Since eac

Prevent metal fragments and debris from falling into the hopper. If processing recycled materials, a magnetic hopper should be added to prevent iron f

The main body of the pin-driven screw is a standard screw. Pins can be placed in the grooves of the melting or metering sections of the screw, or on t

Screws are widely used in plastic molding equipment, such as plastic profile extruders and injection molding machines. The screw and barrel are the co

Commonly used screw materials include 45 steel, 40Cr, nitrided steel, 38CrMoAl, and high-temperature alloys. 1) 45 steel is inexpensive and has good m

The working principle of a nut is self-locking through the friction between the nut and the bolt. However, the reliability of this self-locking decrea

Meets US military standards—MIL-STD 1312 Vibration Test 7. Results; Junker Test; Dynamic Test

Stainless steel self-locking nuts, lock nuts, locking nuts, four-prong nuts, screw-in nuts, safety nuts, thin rod screw connecting nuts, self-locking

Bonded anchors use a special chemical adhesive (anchoring glue) to bond the threaded rod and internally threaded tube to the drilled hole in the concr

Bolts are used to fasten two parts with through holes. This type of connection is called a bolted connection. Since the two parts can be separated by

A bolt (an anchor) is a fastener consisting of a head and a threaded shank, primarily used in machinery manufacturing and construction engineering. It