Split Helical Structure and Positioning
When equipment operates under high-frequency vibration or frequent thermal cycling, microscopic axial clearances easily develop between mating threads, causing ordinary nuts to gradually back off. Stainless Steel Spring Washer is a split, helically offset elastic ring that exerts continuous upward spring tension against the nut bottom once flattened during tightening, while the sharp offset split ends bite lightly into contact faces to resist loosening. It is commonly found on outdoor fan motor mounts, vehicle pump valves, and vibrating joints in humid environments.
Elastic Locking and Corrosion Resistance
Its solid stainless steel material prevents stress-corrosion cracking in damp, acid-alkali mist, or rain-exposed conditions, avoiding the risk of carbon steel spring washers rusting solid and losing elasticity. At the moment of flattening, the helical springback compensates for slight preload loss caused by thermal expansion and contraction of washers or joints, maintaining tight thread friction throughout prolonged high-frequency vibration.

Wind Drive and Vehicle Motor Applications
On wind turbine yaw brake brackets, drive motors for outdoor photovoltaic tracking systems, and mounting bolts on new energy vehicle motor housings, continuous vibration and outdoor temperature swings occur simultaneously. This product requires no anaerobic threadlocker adhesive yet maintains anti-loosening tension outdoors over the long term, allowing straightforward removal or replacement during later servicing.
Forming Control and Fulfillment Assurance
The key to split spring washer performance lies in free height retention after compression and release. The factory verifies split gaps and cross-sectional dimensions through dedicated coiling/forming and strict sampling inspection under the IATF16949 system. Pre-sales advisors assist in verifying nut hardness compatibility, goods carry a 1 to 3 month warranty after shipment, and replacements can be arranged promptly if transit damage occurs.
Product Specifications
|
Parameter |
Specification Metric |
|
Standard |
DIN 127 (B) - 1987 (Type B, Standard) |
|
Core Material |
Stainless Steel |
|
Nominal Diameter |
Φ2–Φ100 (Inner diameter d: 2.1–102.5 mm) |
|
Width and Thickness |
Radial width n: 0.9–14 mm; thickness h: 0.5–8 mm |
|
Free Height |
1–18.9 mm |
Hot Tags: stainless steel spring washer, China stainless steel spring washer manufacturers, suppliers, factory







