Thick Wall Rigidity and Positioning
When working with heavy clamping sleeves, wide-span pins, or heavy-load structures with larger hole clearances, ordinary thin flat washers easily suffer dishing or tearing instability under massive axial tension. Heavy flat washers are specifically developed for heavy-duty clamping sleeves and high-strength bolts, providing bending rigidity far exceeding standard flat washers through a multiplied cross-sectional thickness. They are mainly installed at end faces of heavy equipment clamping sleeves, large suspension pins, and high-preload structural steel beam joints.
Dishing Prevention and High Preload
The thickened wall substantially improves shear and bending resistance, allowing the washer to stay flat without sinking even when the bearing face has minor step differences or large through-hole chamfers. Relying on in-house fully automatic cold heading and heat treatment lines, heavy thick washers achieve uniform metallographic structure and core toughness after forming, avoiding brittle fracture under sudden impact loads.

Wind Power and Heavy Machinery Applications
Heavy internal support frames in wind turbine towers, boom joints of specialized construction machinery, and clamping mechanisms of heavy machine tools experience extremely high bolt preloads accompanied by continuous low-frequency heavy shock. Following years of quality control standards built while serving manufacturers like SAIC, Liyi Fastening enables this heavy-duty series to firmly lock clamping sleeve end faces and prevent whole bolt chains from loosening due to washer crushing.
Full Process Lead Time and Warranty
The factory maintains strict in-process monitoring over thickness-to-diameter ratios and flatness for heavy-duty parts. Standard items have a stocking and scheduling lead time of 3 to 5 working days, while custom thickened specifications take 10 to 15 working days. Delivered products carry a 1 to 3 month warranty, and if breakage occurs during international shipping, our after-sales team arranges direct replacement upon verification.
Product Specifications
|
Parameter |
Specification Range |
|
Standard |
DIN 7349 - 2009 (Plain washers for heavy-duty clamping sleeves) |
|
Applicable Bolt |
M3–M30 |
|
Inner and Outer Diameter |
Nominal inner diameter 3.2–31 mm; outer diameter 9–68 mm |
|
Thickness |
1–10 mm |
|
Material and Weight per 1,000 pcs |
Stainless Steel, Carbon Steel; steel weight approx. 0.436–226 kg |
Hot Tags: heavy flat washers, China heavy flat washers manufacturers, suppliers, factory







